 |
VBMT dies
Burray
| Quantity: | |
|---|---|
Powder forming mold is to put powder into the to compress, solidify, and sinter at high temperature to form high-precision parts,
which can be mass producted. The use of high-precision molds omits the cutting waste after forming and sintering, and achieves
the purpose of reducing costs.
Product Description
VBMT160404-PF VBMT160408-PM VNMG160408-GH VNMG160408
VCGT250606
Rational use of cemented carbide. For the most likely to wear on the parts need to analysis, if necessary, all the bottom and upper
of die should use tungsten carbide. In some cases, such as structurally weak punch difficulty processing or fixed yet, you can use a
reasonable tool steel and cemented carbide used in combination so that the mold manufacture and use must be the most reasonable
and economical.
1. Near-net shape products can be manufactured through molds.
2. Suitable for materials that are difficult to process.3. Quick installation system can not only reduce the time to install the mold, but also reduce the damage rate of the mold.
4. Usually, multiple air holes are embedded in the product, and the visible density is lower than the true density, which reduces the
weight of the product.
5. Use lubricating oil by using air holes. No oil supply is required.
1.Direct factory sale.
2.Reasonable price.
3.good wear resistance.
4.Longer service life.
5.OEM service available.
6.Short and on time delivery.
7.Samples and small orders are acceptable.
Every part is carefully processed (by grinding, machining, milling, wire-cutting, EDM etc) to the exact tolerances shown on the drawing
and carefully checked both in production line and QC room (QC check every dimension of every part before packing and shipping). In
this way, we assured the high precision and thus the interchangeability in the tool room of the customers’ factory.
1.Plastic case filling sponges, and foam. cotained in wooden/carton case.
2.Special packaging according to clients' requirments.
3.Shipping: Shenzhen, Chongqing, Shanghai, Qingdao, Guangzhou, etc. We accept land, air, sea transport and international multimodal
transport.
Q1: Are you a trading company or manufacturer?
A1: We are a manufacturer of tungsten carbide mould. Our factory located in Zigong City, Sichuan Province. Welcome to visit our
factory!
Q2: What about the package?
A2: We use plastic boxes to pack our products, and filled plastic is shockproof and transported in cartons. also It can make as you need
and depend on the shapes of the product.
Q3: What is your minimum order requirement?
A3: OEM and customization are available. we accept the small trial order, big order will get a big discount. and try our best to service our
customers.
Powder forming mold is to put powder into the to compress, solidify, and sinter at high temperature to form high-precision parts,
which can be mass producted. The use of high-precision molds omits the cutting waste after forming and sintering, and achieves
the purpose of reducing costs.
Product Description
VBMT160404-PF VBMT160408-PM VNMG160408-GH VNMG160408
VCGT250606
Rational use of cemented carbide. For the most likely to wear on the parts need to analysis, if necessary, all the bottom and upper
of die should use tungsten carbide. In some cases, such as structurally weak punch difficulty processing or fixed yet, you can use a
reasonable tool steel and cemented carbide used in combination so that the mold manufacture and use must be the most reasonable
and economical.
1. Near-net shape products can be manufactured through molds.
2. Suitable for materials that are difficult to process.3. Quick installation system can not only reduce the time to install the mold, but also reduce the damage rate of the mold.
4. Usually, multiple air holes are embedded in the product, and the visible density is lower than the true density, which reduces the
weight of the product.
5. Use lubricating oil by using air holes. No oil supply is required.
1.Direct factory sale.
2.Reasonable price.
3.good wear resistance.
4.Longer service life.
5.OEM service available.
6.Short and on time delivery.
7.Samples and small orders are acceptable.
Every part is carefully processed (by grinding, machining, milling, wire-cutting, EDM etc) to the exact tolerances shown on the drawing
and carefully checked both in production line and QC room (QC check every dimension of every part before packing and shipping). In
this way, we assured the high precision and thus the interchangeability in the tool room of the customers’ factory.
1.Plastic case filling sponges, and foam. cotained in wooden/carton case.
2.Special packaging according to clients' requirments.
3.Shipping: Shenzhen, Chongqing, Shanghai, Qingdao, Guangzhou, etc. We accept land, air, sea transport and international multimodal
transport.
Q1: Are you a trading company or manufacturer?
A1: We are a manufacturer of tungsten carbide mould. Our factory located in Zigong City, Sichuan Province. Welcome to visit our
factory!
Q2: What about the package?
A2: We use plastic boxes to pack our products, and filled plastic is shockproof and transported in cartons. also It can make as you need
and depend on the shapes of the product.
Q3: What is your minimum order requirement?
A3: OEM and customization are available. we accept the small trial order, big order will get a big discount. and try our best to service our
customers.
